Lift: Pre Wash Ultra Snow Foam

Lift is a highly concentrated pre-wash foaming agent that dissolves and removes a large amount of dirt and grime without contact, before the application of vehicle shampoo or car wash.

Lift uses 12pH alkyl cleaning ingredients, which are strong yet gentle and suitable for use with all pressure foam lance (Foam Cannon or Foam gun) washers. Applied at a typical dilution ratio of 1:10 (or others depending on desired foam viscosity), Lift will remain on surfaces typically for 5 minutes. Lift is specifically formulated to deliver maximum moisture and also rinses off easily. It is not a high foaming surface product, but has been designed as a true active surface agent.

During the panel's dwell period, Lift's bubbles burst and move, encouraging the cleaning and soaking agents to begin working. They remove road grime by bonding with our proprietary blend of surfactants.

How to use:

1. Use on cold surfaces.
2. Dilute Lift with water (we recommend 1:10). You can use thinner proportions for a thinner mixture or richer for a denser foam. I recommend using CARPRO Measure to measure the ounces you need for the mixture.
3. Always allow the product to remain on the surface for a few minutes before rinsing; The longer the dwell time, the better. Do not let the product dry, even diluted.
4. Rinse and wash with CARPRO Reset