CQUARTZ DLUX Wheel & Trim Coating

DLUX is one of the best options to protect exterior plastics. Especially in our very sunny environment in Puerto Rico. This coating leaves a thicker layer (compared to other CQUARTZ coatings) on the surface.

Characteristics:

• Rejuvenates and improves the appearance of exterior plastics
• On the rims (rims or "wheels"), DLUX repels dirt, and reduces the accumulation of brake dust.
• Can be used in headlights or headlights
• Durability up to 12 months on most surfaces.
• The average use for 4 car rings is 12ml.

Kit Includes:

(1) 30ml or 100ml bottle.
(1) applicator
(4) 4"x4" microfiber cloth (suede)
(2) CQUARTZ stickers

Preparation for the surface you want to protect:

1. Work on a cool surface
2. Clean the surface well, we recommend a multi-use such as Multi X o Blast. In cases where you need more cleaning force on plastics, use ReTyre. For the rings, use IronX
3. Use Eraser to remove any residue on the surface to be worked on.
   Wait about 20 minutes for the Eraser residue to evaporate.

Apply to plastics:

1. Dampen the applicator with a bead of DLUX and spread evenly in a small area at a time. You can also use a microfiber applicator.
2. When applying it, it is VERY important to work in an even area even as you go.
3. Don't take on a huge area at once. DLUX dries or "flash" quite quickly in the hot and humid environment of Puerto Rico. Don't try to spread it too much, but make sure you apply an even coat in the first minute before moving on to the next overlapping area.
4. Remove with a microfiber. Approximately 30 seconds to one minute after applying.

Note:

• It can be applied with an air compressor or air brush.
• With more experience, on some textured surfaces, you can apply it without having to remove the excess.
• It can be applied to matte or satin wheels.